Kit and Workstation

Kit and Workstation

Your Kit #

Your kit for this course includes the following parts:

Raspberry Pi Pico and Add-Ons

Prototyping Tools:

Basic Electronic Components:

Parts for Robotics:

Sensors:

Please return the kit as shown below in the pictures latest on January 9, 2026.

Full box

Kit inner box

Kit inner box

Kit contents

Your Workstation #

Workstation

Workstation

We have 16 workstations with a set of tools. Choose one of them and use that specific one whenever you work over at the workshop. For the duration of the course, this workstation is under your responsibility. Clean your station after you stop working each day:

  • Make sure the tip of the soldering iron is clean and shiny
  • Make sure all the tools are in the places where they belong
  • Clean your desk from all wire clippings and other trash. Use the brush and shovel hanging on the tool wall.

Some of the workstations do not have all the tools as shown above. Take a picture of yours in the beginning of the course and make sure it looks the same on the last day. Each of them has at least:

  • Soldering Iron
  • Helping Hands
  • Multimeter
  • Wire Strippers
  • Wire Cutters
  • Needle Nose Pliers
  • PZ0 Screwdriver
  • Solder

A full set should also include the following (but we do not currently have enough tools for everyone):

  • Bench Top Power Supply
  • Desoldering Pump
  • PH1 Screwdriver
  • PZ1 Screwdriver
  • Flat Head Screwdriver

This is also how you should ALWAYS leave your workstation after you are done, not just during this course.